DJI Dock 2 with Matrice 3D Ready to Fly Kit (Care Plus)
DJIDOCK2M3TDBASICRTF
DJI Dock 2 Overview
Experience seamless automated drone flights with the DJI Dock 2, designed exclusively for the Matrice 3D or 3TD drones. This rugged base station is built to withstand outdoor conditions while providing a safe haven for your drone on-location.
User-Friendly Deployment
Deploy the Dock 2 with ease—requiring only two people and boasting a design that's 75 percent smaller and 68 percent lighter than the previous version. Use the Matrice's vision sensors to identify the best GNSS signal spot for optimal placement.
Automated Operations
Enjoy automatic takeoff, landing, and charging while managing everything remotely via DJI FlightHub 2 and cloud-based features.
Weather and Environmental Monitoring
Stay informed with an integrated environmental monitoring system, providing real-time data on rainfall, wind speed, and temperature for safe flight conditions.
Cloud-Based Features
Enhance mission success with cloud-based tools like 3D modeling and route planning. Real-time weather data syncs with forecasts, providing warnings or terminating flights if necessary.
Precision Landing and Quick Charging
Achieve accurate landings thanks to Matrice's camera and Dock 2’s visual positioning markers, supplemented by dual slide ramps. Experience quick charging from 20 to 90 percent within just 32 minutes.
Real-Time Monitoring
Benefit from dual-camera monitoring with internal and external fisheye cameras. Check environmental conditions and oversee drone operations remotely.
Rapid Takeoff and Backup Power
Prep and launch in as little as 45 seconds with a complete propeller inspection and immediate RTK data. A built-in battery backup ensures over five hours of operational power during outages.
Emergency Alerts and Troubleshooting
Receive instant email notifications of flight task failures or emergencies via DJI FlightHub 2, enabling quick access to logs and troubleshooting.
Additional Benefits
6.2-mile operating range
Integrated TEC air conditioning system
Temperature, humidity, and water immersion sensors
Dual-band video transmission
AC and Ethernet lightning protection
Minimal maintenance needed every six months
DJI Matrice 3D/3TD Series Dock
This rugged docking station for the DJI Matrice 3D/TD series provides automated battery charging and mission readiness for rapid drone deployments. It features a weather-resistant design, fast charging, and seamless integration with DJI FlightHub 2 fleet management software.
Key Features:
Automated charging and takeoff: Prepare for your next mission with minimal downtime.
Weather-resistant design: IP55 rated protection against dust and water.
Fast charging: Get your Matrice 30 drone back in the air quickly.
Fleet management: Seamless integration with DJI FlightHub 2.
Enhanced safety: Built-in lightning protection.
Technical Specifications:
Feature
Specification
General
Compatibility
DJI Matrice 3D / Matrice 3TD
Camera
External & Internal Security Cameras
1920 x 1080, 151° FOV, and Auxiliary White Light
Other
Max Allowable Landing Wind Speed
18 mph / 8 m/s
Max Operating Altitude
2.5 Miles / 4000 m
Receiving Frequency of RTK Base Station Satellite (Simultaneously Receive)
GPS: L1 C/A, L2, BeiDou2: B1l, B2l, B3l, BeiDou3: B1l, B3l, GLONASS: L1, L2, and Galileo: E1, E5B
Positioning Accuracy of RTK Base Station
(Horizontal): 0.4" / 1 cm + 1 ppm (RMS) and (Vertical): 8.0" / 2 cm + 1 ppm (RMS)
Air Conditioning Type
TEC
Lightning Protection (AC Power Port)
20 kA (Rated Value), Meets EN 61643-11 Type 2 and IEC 61643-1 Class Ⅱ Protection Level Requirements
Lightning Protection (Ethernet Port)
10 kA (Total), Meets EN/IEC 61643-21 Category C Protection Level Requirements
Inputs / Outputs
Ethernet
10/100/100 Mb/s Adaptive
Wireless
Mobile App Compatible
Yes: iOS & watchOS
App Name
DJI Pilot 2 & FlightHub 2
Transmission
Video Transmission System
O3 Enterprise
Operating Frequency
2.4000 to 2.4835 and 5.725 to 5.850 GHz
Antenna
Built-in 4 Antennas, 2T4R, Supports Intelligent Switching
Transmitter Power (EIRP) (2.4 GHz)
< 33 dBm (FCC); < 20 dBm (CE/SRRC/MIC)
Transmitter Power (EIRP) (5.8 GHz)
< 33 dBm (FCC); < 14 dBm (CE); < 23 dBm (SRRC)
Power
Power Source
Proprietary Interface (Included)
AC Input Power
100 to 240 VAC, 50 / 60 Hz
Charging (Output Voltage)
28 VDC
Charging Time
Up to 32 Minutes
Air Conditioning System Operating Voltage
28 VDC
Backup Battery (Capacity)
12 Ah
Backup Battery (Output Voltage)
12 V
Backup Battery (Type)
Lead-Acid
Backup Battery (Runtime)
> 5 Hours
Environmental
Environmental Resistance
Dust/Water-Resistant (IP55)
Certifications
EN 61643-11 Type 2, EN 61643-21 Category C, IEC 61643-1 Class II, IEC 61643-21 Category C
Operating Temperature
-13 to 113°F / -25 to 45°C
Physical
Color
White
Dimensions
4 x 1.9 x 1.4' / 1228 x 583 x 412 mm (Dock Cover Opened) <br> 1.9 x 1.9 x 1.5' / 583 x 570 x 465 mm (Dock Cover Closed)
Weight
75 lb / 34 kg (Without Drone)
What's in the Box:
To ensure you have everything needed for a seamless setup and operation, the DJI Matrice 30 Series Dock includes the following:
DJI Dock 2: The core docking station with automated charging, weather protection, and integrated systems.
Wind Speed Gauge Module: Provides accurate wind speed measurements for safe drone operations.
4 x Expansion Bolt: Securely mount the dock to a suitable platform.
Ethernet Cable Connector: Enable wired network connectivity for reliable data transfer.
Power Cable Connector: Connect the dock to an AC power source.
6 x Wire Ferrule: Ensure secure and reliable electrical connections.
Installation Hardware & Tools: Everything you need to assemble and install the dock.
Limited 1-Year Manufacturer Warranty: Peace of mind with DJI's warranty coverage.
35 min • Libre de Costo
